Pole shaft shall be weldable-grade, hot-rolled, commercial quality carbon steel tubing conforming to ASTM A595 Grade A. Options include 11 gauge and 7 gauge. All Welds shall conform to AWS D1.2 using ER70S-6 electrodes.
4-Bolt Steel Base Plate of fabricated hot rolled carbon steel conforming to ASTM A36 or equivalent (36 ksi minimum yield) with 2-piece Base Cover and attaching hardware. Base Cover will be fabricated from metal materials.
Up To 5.9” Butt Diameters – Reinforced, 3” x 5” Handhole with Cover, Stainless Steel Screw and Back Bar. A Grounding Provision incorporating a tapped 1/2”-13NC hole will be welded to the handhole frame.
6+ Butt Diameters – Reinforced, 4” x 6-1/2” Handhole with Cover, Stainless Steel Screw and Back Bar. A Grounding Provision incorporating a tapped 1/2”-13NC hole will be welded to the handhole frame.
Anchorage Kit will include four (4) L-shaped Steel Anchor Bolts conforming to AASHTO M314-90 Grade 55. Ten inches (10”) of threaded end will be galvanized per ASTM A153. Kits will contain eight (8) Hex Nuts, four (4) Lock Washers, and eight (8) Flat Washers (all components Galvanized Steel). A bolt circle template will be provided.
If determined necessary by Big Shine LED an internal, factory installed, Second Mode Vibration Damper will be provided. Customer specification of the damper is available.
Side Drill Mount, Tenon Mount
Base Type: G13, R1, D7FA8, G16T-5, Rotable Tubes
Total Harmonic Dist.
1 LM80 and TM21 results are available upon request.
Specifications are subject to change without notice.
18°, 190°, 210°