The pole shaft will be constructed of seamless extruded tube of 6XXX Series Aluminum Alloy per the requirements of ASTM B221. The shaft assembly shall be full-length heat treated after base weld.
4-Bolt Cast Aluminum Base Flange of Alloy 356-T6 with three (3) Stainless Steel Tamper-Resistant Attaching Screws.
4”-5” Butt Squares – 2” x 4” Handhole with square Lap Style Aluminum Door and two (2) Stainless Steel Self-Tapping Attaching Screws. A Grounding Provision incorporating a tapped 1/4”-20NC Grounding Provision is provided.
Anchorage Kit will include four (4) L-shaped Steel Anchor Bolts conforming to AASHTO M314-90 Grade 55. Ten inches (10”) of threaded end will be galvanized per ASTM A153. Kits will contain four (4) Hex Nuts, four (4) Lock Washers, and four (4) Flat Washers (all components Galvanized Steel). A bolt circle template will be provided.
When determined necessary by Big Shine LED, a Vibration Damper will be factory-installed inside the pole shaft. Customer specification of the damper is available.
Side Drill Mount, Tenon Mount
Base Type: G13, R1, D7FA8, G16T-5, Rotable Tubes
Total Harmonic Dist.
1 LM80 and TM21 results are available upon request.
Specifications are subject to change without notice.
18°, 190°, 210°